ZigStar Shield¶
Features¶
- TI CC2652PSimpleLink™ 2.4 GHz Multiprotocol Wireless MCU targeting Zigbee,Bluetooth 5.1 Low Energy,Thread + 19.5-dBm high-power amplifier
- Support RF-BM-2652P1 and RF-BM-2652P2 Module from RF-STAR,with CC2652P on board
- BSL,RST Buttons
- 2 LED for indication
- Compatible with Z2M and ZHA
- IPX port for an external antenna
- Self-programming via cc2538-bsl. No external programmer needed! Push BSL button to trigger this mode.
Bill of Materials:¶
EasyEDA Generated Boom,you can order on LCSCdirectly - BOOM
| Designator | Name | Footprint | Quantity |
|---|---|---|---|
| U1 | RF-BM-2652P1/P2 | 1 | |
| U2 | AMS1117-3.3 | SOT-223 | 1 |
| R1 | 10 kohm | SMD 0805 | 1 |
| R2,R3 | 1 kohm | SMD 0805 | 2 |
| C1 | 10uF | SMD_L3.5-W2.8-R-RD | 1 |
| C2 | 22uF | SMD_L3.5-W2.8-R-RD | 1 |
| C3 | 100nF | SMD 0805 | 1 |
| L1,L2 | RED/GREEN LED | SMD 0805 | 2 |
| SBL,RST | PUSH BUTTON | SMD_L3.9-W3.0-P4.45 | 2 |
| JTAG | PIN HEADER 5 PIN | 2.54x5P | 1 |
| H1 | FEMALE HEADER 2x5 PIN | 2.54 2x5P | 1 |
Next item is not available on LCSC,you can get it on Aliexpress:
Firmware¶
Module is compatible with Z2M. Firmware CC1352P2_CC2652P_launchpad_*.zip.
Default TX Power is 5dbm. It can be adjusted in Z2M config section:
experimental:
transmit_power: 5
Available TX power values: -20,-18,-15,-12,-10,-9,-6,-5,-3,0,1..5,14..20